Appearance

What does revetment cost?

An amount per metre of bank is useful only when its contents are clear. Compare panels, supporting structure, fixings, finishing, transport and project-specific items within exactly the same scope.

Prepare your project

Build your own project budget

Enter known totals for each cost category from your material list, supplier quote or estimate. No example prices are prefilled. This is your worksheet, not a quote from DamwandDirect.

Use the same VAT basis for every line. This selection labels the amounts; switching does not convert them. Check your entries if you change the basis.

Leave unknown amounts blank. Enter 0 only where a cost is confirmed as zero or the category does not apply. Use up to two decimal places, with no thousands separators or currency symbol.

1. Panels, sheet piling or boarded sections
2. Support: posts, walers and any anchoring
3. Finishing and fixings
4. Transport and loading/unloading
5. Installation, removal and disposal
6. Assessment, investigation and permissions

Subtotal of known categories

No known amounts yet; a total is not available.

0/6 completed categories · 6 unknown or invalid categories

Incomplete: this is not a complete project price.

Open the downloaded HTML file to print it or save it as a PDF using the print function. The download contains your entries and works offline.

Your entries stay only on this page in your browser. Nothing is saved or submitted. Download your result before leaving the page.

Prolock Sigma costs

Start with the panels and your project

Check the current price for each panel size. Posts, finishing, fixings and transport are also assessed for the complete revetment.

Want to compare panel costs per linear metre only? At a working width of 50 cm, allow two panels per straight metre. Multiply the unit price of the same panel size by two, and always compare amounts on the same VAT basis.

Calculate the initial panel quantity

Compare timber and plastic

First check whether the price is per metre or per piece

Our hardwood sheet piling and battened panels are priced per linear metre at the selected profile or panel height. Sigma panels, separate posts, boards and beams have a unit price. Compare the same height and complete construction, and add extra components and transport separately.

Materials example: panels only

Straight 10-metre route: 20 Sigma panels of 50 × 100 cm

The Sigma panels in the current range have a working width of 0.5 metres. For a straight 10-metre route, the first calculation is therefore 10 divided by 0.5: 20 panels. For this example we select the 50 × 100 cm product size, per piece.

Loading the current price for the 20 panels.

The 100 cm dimension is not advice on retained height or embedment depth. This is not a complete materials list or project price. Corners, connections, height differences, post construction, fixings, finishing, transport, labour and installation are not included. The example demonstrates why a panel calculation must not be presented as a complete quote.

Product price and project price

Distinguish three statuses

Fixed product price
The confirmed amount for one selected product variant.
Price check
A product entry requiring confirmation of its current price or VAT status first.
Project quote
The checked specification with product scope, open issues and the agreed transport or project boundary.

Short answer

The price is a sum, not a standalone figure

panels or boards + posts and walers + fixings and finishing + transport + any assessment, consent and installation

Current product prices form only the known part. Unresolved project details remain visible checks until assessed.

For comparable quotes

  • Use the same route length for every supplier
  • Record retained height, water level and loads consistently
  • Have all supporting and finishing components itemised
  • Ask what transport, unloading and installation include or exclude
  • Keep assumptions and unresolved costs visible

Six cost categories

What belongs in a complete cost breakdown?

1. Earth-retaining wall

Plastic panels, hardwood boards, battened panels or sheet-pile boards form the visible basis. Variant, length, thickness, working width and quantity determine the initial product subtotal.

2. Supporting structure

Posts, walers and any anchoring are functional structural components. Required sizes and quantities follow from soil, water level, retained height and load.

3. Fixings and finishing

Bolts, nuts, washers, joining pieces, corner profiles, capping rails, caps and tidy ends can form a significant part of the materials list.

4. Transport and unloading

Long goods require suitable transport, access and a safe unloading area. Use the delivery and collection page for current terms; do not copy old transport charges into a new budget.

Current transport information

5. Design and consent

Structural assessment, soil investigation, permits, notifications or consultation with the water authority are not automatically included in a webshop purchase. Record who carries out and pays for them.

6. Installation and risk

Installation, equipment, access, working space, cables and pipelines, temporary provisions and reinstating the surroundings belong in the installation budget where applicable.

Inputs for a quote

Provide facts that reduce unresolved costs

1

Measure and photograph

Record straight sections, corners, height transitions, water level, retained height and visible obstacles. Take overview and detail photos.

2

Describe soil and use

State what is known and unknown about the soil and which loads will act behind the bank. Uncertainty should remain visible.

3

Define the delivery boundary

Provide postcode, access, collection or delivery and desired timing. Explicitly ask whether unloading, installation and assessment are included in the quote.

Frequently asked questions

Answers about prices and quotes

Where can I find current Prolock Sigma prices?

At DamwandDirect, select the Sigma panel size or component on the product page. It shows the current price for the selected variant or the route to request a quote. A complete revetment also includes supporting posts, any anchoring, finishing, fixings and transport. The panel price is therefore not a complete project price.

How do I convert the Sigma panel price into a price per metre?

The Sigma panels in our range have a working width of 0.5 metres. One straight linear metre requires two panels: multiply the price per panel in the selected size by two. For 10 metres, that is 20 panels. These are panel costs only; corners, supporting posts, anchoring, finishing, fixings, transport and installation are excluded.

How do I compare a hardwood price per metre with a Sigma price per piece?

Hardwood sheet piling and battened panels are offered per linear metre at the selected height. Sigma panels are sold per piece and are 0.5 metres wide: two panels form one straight metre. Compare the same height and construction, and add posts, walers, fixings, finishing, transport and installation separately. The difference in sales unit says nothing about structural suitability.

What does revetment cost per metre?

There is no reliable general price per metre without a project specification. The same bank length may need different panels, posts, walers, anchoring, finishing, transport and installation. First calculate the complete materials scope for one specific situation.

Is the panel price the complete revetment price?

No. The panel is one component. Posts, walers, fixings, corners, finishing, transport, structural assessment, permits and installation can be separate costs.

Do DamwandDirect prices include VAT?

The product page states the price status for each current variant and whether an amount including VAT has been confirmed. Entries still requiring price checks are not presented as fixed prices. Always check the selected product variant.

Is installation included in an order or quote?

Not automatically. DamwandDirect sells products and checks enquiries. Structural design, permit assistance, installation and specialist installation equipment are included only when expressly and demonstrably agreed.

Choose the right next step

View the system and current products first

Not sure whether plastic, hardwood post-and-panel construction or continuous sheet piling is suitable? Compare the construction options first. Once the route is clear, select current variants or request a checked Prolock quote.

Verifiable sources

Sources for this page

The links below support the factual information. Manufacturer sources remain clearly identified; check local rules with the competent authority. Linked external original sources are in Dutch and government sources concern the Netherlands.