Appearance

Revetment materials from DamwandDirect

Buy hardwood revetment

At DamwandDirect, choose hardwood sheet-pile profiles or battened revetment panels for your waterfront. View the product families and combine them with posts, boards and walers. Sizes, current prices and ordering or quote routes are on the product page.

Start with the construction

Continuous sheet piling or posts with panels?

In continuous hardwood sheet piling, vertical profiles connect to each other. In post-and-panel revetment, posts support panels or boards. This difference determines the components needed. Soil, water level, retained height and load remain decisive for the design.

How to compare effectively

  • Choose the construction method first
  • Record retained height and water levels
  • Compare prices using the correct sales unit

The selected variant shows price, sales unit and ordering or quote route. Collection by appointment in Meppel and delivery follow the delivery terms.

Choose your route

From construction method to component

Continuous hardwood sheet piling

Compare 40 and 50 mm thick sheet-pile profiles. Total profile height is not the visible retained height; part of the construction goes into the ground. Greater thickness alone does not prove suitability.

View sheet piling families

Battened panels

View half-hardwood or all-hardwood variants. Compare the exact construction and height on the product page; the material name alone does not describe the complete structure.

View revetment panels

Build up with posts and boards

For post-and-board construction, choose separate posts, boards, walers and fixings. Coordinate cross-sections and connections before finalising the materials list.

Compare boards and walers

From sketch to order

Choosing timber sheet piling: match the construction to the sales unit

The construction determines whether you need continuous sheet pile profiles or panels supported by posts. Compare the sketches, then record the dimensions and order details.

Two principles with different connections

Original principle sketches in front view, not to scale. They show component orientation; they are not construction details, post spacing or required embedment depths.

Continuous vertical profiles

Full profile heightGround line (schematic)
Profiles join along the wall and continue below the ground line. The selected 40 or 50 mm is the thickness; the full profile height includes the embedded part. Retained height and required embedment follow from the design, not this sketch.

Horizontal panels between posts

Supporting postsPanel / horizontal parts
The panel face connects to posts. Establish connections, support and any waler before counting components. The catalogue sells these panels per linear metre at a selected height; the drawn bays do not indicate a fixed delivery width.

Worked example: 6 metres of wall with 2-metre-high profiles

Suppose you are comparing a straight 6 m run in the 40 mm family, using the published variant with a full profile height of 2 m. This example only converts the sales unit; it does not select a construction for your site.

Length along the bank
6 m
Selected full profile height
2 m · 40 mm thick
Quantity in this sales unit
6 linear metres
Geometric wall area
6 × 2 = 12 m²

You are comparing 6 linear metres of the selected 2 m high variant, not 6 individual boards. The 12 m² is the geometric area across the full profile height, including the embedded part; it is not the visible retaining area or an additional order quantity.

A board count requires the effective profile width, among other details, which has not been established here. Posts, walers, fixings, anchoring, capping, transport and installation have not been calculated. This is not a complete project price or evidence that a 2 m high profile is suitable.

Check the 2 m high 40 mm variant

What is known and what still needs confirmation?

Use this order checklist alongside the size table. Carry the exact variant and sales unit into your quote comparison; do not fill in missing product or project details from a photograph or family name.

What is known and what still needs confirmation?
ChoicePublished and knownConfirm before ordering
40 mm sheet piling40 mm thick; full profile heights 2–4.5 m; per linear metre at the selected height.Exact profile and effective width if a board count is needed; suitable profile height, embedment depth, connections and any anchoring.
50 mm sheet piling50 mm thick; full profile heights 2.5–5 m; per linear metre at the selected height.The same design and connection details as for 40 mm. Greater thickness alone does not establish a safe retained height.
Part-hardwood panel40–180 cm high in 20 cm increments; per linear metre. The catalogue names an Azobé component; the remaining construction is unspecified.Which parts are Azobé, remaining timber species and construction, delivery widths/layout, battens, any fabric and fixings; exact contents supplied.
Full-hardwood panel40–180 cm high in 20 cm increments; per linear metre. The catalogue lists Azobé.Exact panel construction and delivery widths/layout, battens, any fabric and fixings; connection to the chosen posts and exact contents supplied.

Check material and certification details for the exact variant and delivered batch. The family name does not establish a general service life, strength or certification for the complete revetment.

Select individual posts and boards separately per piece, with their own cross-section and length. Panel height is not post length. Establish quantities, post spacing and connections from the complete construction.

Product basis: the four linked product families. Check those pages for the chosen variant, current price and sales route.

Products and sizes

Choose a product family

Open a product for published variants and the current price, availability and sales route. The selection below is not a complete project list.

Compare the published profile and panel heights for each product family. Sheet-pile profile height includes the part below ground, so do not compare it directly with the height of a panel between posts.

Published sizes and sales units by product family
Product familySizes within the familySales unit
Hardwood sheet piling 40 mm2 m high; 2,5 m high; 3 m high; 3,5 m high; 4 m high; 4,5 m highper linear metre
Hardwood sheet piling 50 mm2,5 m high; 3 m high; 3,5 m high; 4 m high; 4,5 m high; 5 m highper linear metre
Mixed-hardwood bank retaining panel40 cm high; 60 cm high; 80 cm high; 100 cm high; 120 cm high; 140 cm high; 160 cm high; 180 cm highper linear metre
Full-hardwood bank retaining panel40 cm high; 60 cm high; 80 cm high; 100 cm high; 120 cm high; 140 cm high; 160 cm high; 180 cm highper linear metre

This overview shows sizes, not current stock. Check the selected variant and sales route on the product page.

40 and 50 mm hardwood sheet piling

Open the product family for published heights and the current sales route. Have thickness, profile height, embedment depth and any anchoring assessed together.

Battened revetment panels

A panel is one waterfront component. Supporting posts, connections, finishing and fixings are determined separately. Check material construction and any certification for each exact product.

Bank retaining walls and sheet piling

TLV-certified hardwood

Mixed-hardwood bank retaining panel

Mixed-hardwood bank retaining panel in 8 variants · Mixed-hardwood version; Azobé component according to source; remaining construction unspecified. Product group: Battened hardwood bank retaining panels.

Published product baselineCurrent price and stock are checked on the product page.

8 published variants

View the complete range

Compare prices

A metre of bank is not a square metre of timber

The published sheet piling and panel variants on this page are sold per linear metre at the selected profile or panel height. Compare the same height and sales unit. Posts, separate boards, walers, fixings, transport and installation are not automatically included in that metre price.

View the complete cost breakdown

Complete the construction

Connect the right components

Coordinate panels, posts, boards, walers, connections and finishing. Check certification and material details for each exact product variant.

Frequently asked questions

Questions about hardwood revetment

Which hardwood sheet piling thickness do I need: 40 or 50 mm?

Both thicknesses are in the DamwandDirect range. The right choice follows from the complete structure: soil, water level, retained height, load, embedment depth and any anchoring. Choose thickness after project assessment; 50 mm is not a general strength guarantee.

What is included in the metre price of hardwood revetment?

The price applies to the selected sheet piling or panel variant per linear metre at the stated height. A complete revetment may also require posts, walers, fixings, finishing and anchoring. Transport and installation are separate items. Check the product page and final quote for the same components.

Can I also buy separate components for timber revetment?

Yes. Besides sheet piling and panels, DamwandDirect has posts, boards, beams, walers and fixings. View the selected product variant for current price and ordering or quote route. Have the combination and required quantities checked for your project conditions.

From selection to materials list

Discuss your materials enquiry with us

Provide length per route section, corners, desired construction, retained height, normal and high water levels, known soil conditions and loading behind the bank. Also state whether existing revetment is being replaced and how the unloading location is accessed.

We can check variants, quantities, availability and transport in the quote. Product selection and a quote do not replace structural design or assessment of the location.

Working on an existing waterfront? Also read about replacing revetment and the location-specific permit check.