Appearance

Revetment materials from DamwandDirect

Buy revetment boards

View separate boards and panel parts for post-and-board revetment at DamwandDirect, plus beams and walers for the associated construction. Choose the component's function first, then compare cross-section, length and fixings.

Start with the construction

Are you looking for a panel board or a waler?

Boards can together form the earth-retaining panel; a beam or waler has a different position in the structure. Required thickness and width follow from support, board direction, connections and load. A decking board or thin finishing piece is therefore not an automatic replacement for a revetment board.

How to compare effectively

  • Distinguish panel, waler and finishing
  • Compare cross-section, length and cutting waste
  • Coordinate fixings and support together

The selected variant shows price, sales unit and ordering or quote route. Collection by appointment in Meppel and delivery follow the delivery terms.

Choose your route

From construction method to component

Hardwood boards

Compare board cross-sections for the selected post-and-board construction. Thickness, board width and post spacing must fit as one system; wider or thicker is not an independent design choice.

View hardwood boards

Treated panel parts

These product families combine the descriptions board, panel part and batten. Check the material specification and the function of the chosen size in your design.

View treated panel parts

Beams and walers

Choose a waler or beam for the selected panel, board and post construction. Connections and any anchoring form part of the complete structural assessment.

View beams and walers

Reading dimensions

What do thickness, width and length mean?

The first two dimensions describe the cross-section. Length runs from one end to the other. These are two actual catalogue variants; the drawings are schematic and not to scale.

Board: Thickness 40 mm = 4 cm; Width 200 mm = 20 cm; Length 3,000 mm = 300 cm = 3 mEnd faceWidth: 200 mmThickness: 40 mmLength directionLength: 3 m
Board · 40 × 200 mm / 3 m

Board: 40 × 200 mm / 3 m

Thickness
40 mm = 4 cm
Width
200 mm = 20 cm
Length
3,000 mm = 300 cm = 3 m

Sold per piece: one selected length is one product.

View dimensions and variants

A product dimension does not establish suitable post spacing, embedment depth or retained height. Match the complete construction to soil, water levels and loads.

Products and sizes

Choose a product family

Open a product for published variants and the current price, availability and sales route. The selection below is not a complete project list.

Compare the published sizes of the selected boards, panel parts and walers. Cross-section and length are listed together for each product family. A waler has a different function from the boards forming the panel.

Published sizes and sales units by product family
Product familySizes within the familySales unit
Hardwood board 20 × 200 mm20 × 200 mm / 2 m; 20 × 200 mm / 2,5 m; 20 × 200 mm / 3 m; 20 × 200 mm / 3,5 m; 20 × 200 mm / 4 m; 20 × 200 mm / 4,5 m; 20 × 200 mm / 5 mper piece
Hardwood board 30 × 200 mm30 × 200 mm / 2,5 m; 30 × 200 mm / 3 m; 30 × 200 mm / 3,5 m; 30 × 200 mm / 4 m; 30 × 200 mm / 4,5 m; 30 × 200 mm / 5 m; 30 × 200 mm / 5,5 mper piece
Hardwood board 40 × 200 mm40 × 200 mm / 3 m; 40 × 200 mm / 3,5 m; 40 × 200 mm / 4 m; 40 × 200 mm / 4,5 m; 40 × 200 mm / 5 m; 40 × 200 mm / 5,5 mper piece
Hardwood board 40 × 300 mm40 × 300 mm / 3 m; 40 × 300 mm / 3,5 m; 40 × 300 mm / 4 m; 40 × 300 mm / 4,5 m; 40 × 300 mm / 5 mper piece
Treated board / panel board / batten 20 × 200 mm20 × 200 mm / 3 m; 20 × 200 mm / 4 m; 20 × 200 mm / 5 mper piece
Treated board / panel board / batten 28 × 195 mm28 × 195 mm / 3 m; 28 × 195 mm / 4 m; 28 × 195 mm / 5 mper piece
Treated board / panel board / batten 30 × 250 mm30 × 250 mm / 4 m; 30 × 250 mm / 5 mper piece
Hardwood beam 50 × 150 mm50 × 150 mm / 2,5 m; 50 × 150 mm / 3 m; 50 × 150 mm / 3,5 m; 50 × 150 mm / 4 m; 50 × 150 mm / 4,5 m; 50 × 150 mm / 5 m; 50 × 150 mm / 5,5 mper piece
Hardwood beam / waling / capping rail 100 × 150 mm100 × 150 mm / 3,5 m; 100 × 150 mm / 4 mper piece
Hardwood beam / waling / capping rail 150 × 200 mm150 × 200 mm / 4 mper piece
Treated beam / waling / capping rail 50 × 150 mm50 × 150 mm / 3 m; 50 × 150 mm / 4 m; 50 × 150 mm / 5 mper piece

This overview shows sizes, not current stock. Check the selected variant and sales route on the product page.

Hardwood boards for your construction

Compare selected board families below in different thicknesses and widths. The product page shows all published lengths within the chosen family; the full range contains more cross-sections.

Treated boards, panel parts and battens

Compare these variants with the specified size and material choice. Include the positions of battens, connections and support in the materials list.

Hardwood and treated beams or walers

Compare the 150 × 200 mm (15 × 20 cm) hardwood beam, among others, in its published length of 4 metres. Cross-section and beam length are different measurements. Check the connections and function of each beam as a waler, capping timber or another component of your design.

View the complete range

Compare prices

A board price is not the price of a complete waterfront

Separate boards and beams in this overview are sold per piece in the selected length. Do not multiply a unit price by the board length again. Quantity depends on route, board direction, panel height, connections and cutting waste; posts and fixings count separately.

View the complete cost breakdown

Complete the construction

Connect the right components

Coordinate panels, posts, boards, walers, connections and finishing. Check certification and material details for each exact product variant.

Frequently asked questions

Questions about revetment boards

What is the difference between revetment boards and sheet-pile profiles?

Post-and-board revetment combines separate boards with supporting posts. Continuous hardwood sheet piling uses connecting profiles. Construction method, support and connections differ. Compare the complete construction first, then individual product sizes.

What thickness of revetment board do I need?

Board thickness depends on board width and direction, support, post spacing, soil, water level and load. Do not choose on thickness or lowest price alone. Have cross-section and fixings assessed within the complete construction.

Can I use a decking board as a revetment board?

The product name or timber species alone does not prove that a decking board is suitable as an earth-retaining panel. Profile, cross-section, support, connections and load must be assessed separately. Decking boards are therefore not listed as equivalent replacements in this overview.

From selection to materials list

Discuss your materials enquiry with us

Provide route length, panel height, board direction, post positions and any design drawing. State water levels, soil, loading behind the bank and existing connections. Note which beams, connections, fixings and finishing are already specified.

We can check variants, quantities, availability and transport in the quote. Product selection and a quote do not replace structural design or assessment of the location.

Working on an existing waterfront? Also read about replacing revetment and the location-specific permit check.