Appearance

Buy Prolock Sigma: panels and components

At DamwandDirect you can order Prolock Sigma panels and related components or request a quote. Choose a panel size below, calculate panel quantities and check which posts and finishing components belong on your materials list.

Sigma is a hybrid revetment system: a relatively short plastic panel retains the bank soil, while longer, project-specific posts support the structure. The system is intended for ponds, ditches and small watercourses, among other uses.

Prolock Sigma panel with black capping rail

Buy Prolock Sigma: start with sizes and quantities

How do the plastic panels, piles and capping work together? See how Prolock works with an explanatory schematic.

For one straight metre of revetment, allow two panels with a working width of 50 cm. Then choose the panel length and supporting posts based on soil, water level and retained height. A panel price is not a complete price per metre of revetment: posts, finishing, fixings and transport are additional.

With a complete materials list, choose the variants on the product pages below. Current price and orderability are shown for each size. Would you like the construction checked? Include the route length, height difference and corners in your Prolock quote request. After submitting the enquiry, you can share project photos using the reference received. An enquiry is non-binding and is not an order.

Prolock Sigma panels and finishing

Start with the Sigma panels: sizes and current prices. Then choose a capping rail for a continuous top edge or caps for individual profile tops. For a change of direction in the panels, see the Prolock Sigma corner connector.

Request a checked quote

Only need posts?

Individual spruce posts for Prolock

Even if you already have the panels: choose round timber posts Ø100 mm in seven lengths from 2 to 6 metres. Enter quantities per length and combine them in one non-binding enquiry.

  • Price and availability are confirmed in the quotation
  • Multiple lengths in one overview
  • Collection by appointment in Meppel or delivery by quotation
Spruce posts for Prolock Ø100 mm: lengths and quotation

The right post length and spacing depend on your project. Availability and transport are confirmed before the quotation.

Short answer

What is Prolock Sigma?

Sigma combines a plastic earth-retaining panel with longer, project-specific posts. DamwandDirect sells Sigma panels with a working width of 0.5 metres and lengths from 0.5 to 5 metres. Soil, water level, retained height and load determine the complete construction.

0.5 m panel width

The sales variants differ in panel length.

Hybrid construction

The plastic panel and supporting posts each have their own function.

Recycled plastic

With a dark protective outer layer, according to Profextru.

Availability by variant

Check current availability on the product page. A quote request does not reserve stock.

Sizes and components

Compare Sigma sizes and pricing units

Compare the price for each selected product size. A panel price, a capping rail price and a complete metre of revetment include different components. Current amounts are shown on the product pages.

On small screens you can scroll the table horizontally.

Component and sizesWhat does the price cover?How do you determine the quantity?
Sigma panel
50 cm wide; lengths from 0.5 to 5 m
Per panel in the selected length.Two panels per straight metre at a working width of 0.5 metres. Corners, ends and height transitions are counted separately.
Machined spruce post Ø100 mmPer post in the selected length; the product page shows the order or quote route.Length and post spacing follow project assessment, rather than panel width alone.
Sigma capping rail
3 or 6 m
Per full 3 or 6 m length, rather than per metre.Plan lengths for each straight section, allowing for joints and cutting waste.
Capping rail connectorPer separate connector; the capping rail is a separate item.Count joints between the selected capping rail lengths.
Sigma corner profile
3 m profile
Per 3 m corner profile.Specify changes of direction and panel height; have the required profiles and top finishing checked together.
Sigma profile capPer separate cap.Count individual open profile tops if you choose this finishing.

From bank length to panel count

A straight 10-metre route starts with 20 panels

That follows only from dividing 10 metres by the 0.5-metre working width. Panel length includes the part in the ground; do not infer a universal embedment depth from that dimension. Posts, corners, finishing, fixings and transport are determined separately.

Also view the complete cost breakdown

Panel count and panel costs

Calculate panels for straight sections

Enter one or more straight sections and choose a Sigma panel length. The calculator uses 0.5 metres of working width per panel and the current panel price including VAT. Panel length is the full product dimension, not the retained height.

Loading current Sigma panel prices…

Straight sections

Use a comma or full stop as the decimal separator, with up to three decimal places.

Up to 20 straight sections. Each section is rounded up separately to whole panels; this count does not reuse offcuts between sections.

This is a preliminary panel count, not a structural calculation. Rounding each straight section up separately is the planning assumption. Reusing offcuts requires checking interlocks and end details; the calculator does not create a cutting plan.

Panel length, retained height, height changes, corners, posts and anchoring are assessed separately. Posts and anchors are not calculated here.

Have your project assessed through the Prolock quote enquiry. Also view the Sigma panels.

Which banks is Sigma intended for?

Sigma is an option for limited retained heights and light loads where a complete heavy sheet-pile wall is not necessarily required. Examples include a garden pond, ditch bank or small watercourse. Soil and height difference always remain decisive.

  • Panel lengths from 0.5 to 5 metres in the range
  • Capping rail, joining piece, corner connector and cap
  • Machined round posts and additional revetment timber

What determines the right construction?

Panel length is only one part. Post length, spacing, fixings and any anchoring must also be able to resist the soil and water pressure at the site.

  • Soil, water level and retained height
  • Post length, spacing and anchoring
  • Access, transport and installation method
Compare Sigma with Nova and Omega

The manufacturer describes the system construction on the official Sigma page (Dutch). For technical product data, you can request the data sheet from Profextru (Dutch). Also provide soil, water levels and loads when having your project assessed.

From system to a suitable choice

Compare the system and required components first. On each product page you can choose the size and see the current price and availability. Unsure about the construction or connection to existing revetment? Add that question to your quote request.

Verifiable sources

Sources for this page

The links below support the factual information. Manufacturer sources remain clearly identified; check local rules with the competent authority. Linked external original sources are in Dutch and government sources concern the Netherlands.