Suitable for
- Bank retaining wall
- Finish
- Structural construction

Reference photo of Okan hardwood boards; dimensions and length as selected, colour may vary.
Product photos show the linked item. Reference photos show the same product family, but size or length may differ. Application images and generated illustrations are visibly labelled.
Structural timber and decking
This hardwood board with a section of 40 × 200 mm is intended for thick, wide board structures and is available from 3,00 m to 5,50 m. Match 40 × 200 mm to retaining height, post spacing, water and earth pressure, fixings and required board orientation. Structural suitability remains dependent on the full project situation.
Checking current price and availability…
Choose variant and quantity. Where an order button is shown, add the item to your cart and check delivery or collection and the total before payment. Where a quote button is shown, request a non-binding proposal. We confirm product choice, availability and delivery; an enquiry is not yet an order.
Collection is available by appointment in Meppel. Delivery takes destination, access, unloading place and any multiple loads into account.
View delivery and collectionPractical selection guide
Match 40 × 200 mm to retaining height, post spacing, water and earth pressure, fixings and required board orientation. Always have section, length and structural suitability assessed against the project situation.
Support every joint, check alignment for each board and allow for natural timber movement in the measurements. Match fixings, joints and installation method to the chosen construction in advance.
Check the selected variant
Compare exact size, material variant, finish and sales unit before ordering or requesting a quotation. The selector above determines the selected SKU, price and current availability status.
Decision point for this product family
The section is 4 cm thick and 20 cm wide. The six lengths range from 3 to 5.5 metres, priced per piece. Compare the board with waling by its structural function and record board orientation, support and joints. Greater thickness alone does not prove a higher allowable load.
See the difference between board and walingDimensions and sales units
This size and unit baseline was checked on 25 August 2026. While loading, DamwandDirect checks the current management status. A price, stock status or ordering action appears only after that check.
| Variant | Size | Sales unit | Route |
|---|---|---|---|
| 40 × 200 mm / 3 m · per piece | 40 × 200 mm / 3 m | per piece | Order directly after current checks |
| 40 × 200 mm / 3,5 m · per piece | 40 × 200 mm / 3,5 m | per piece | Order directly after current checks |
| 40 × 200 mm / 4 m · per piece | 40 × 200 mm / 4 m | per piece | Order directly after current checks |
| 40 × 200 mm / 4,5 m · per piece | 40 × 200 mm / 4,5 m | per piece | Order directly after current checks |
| 40 × 200 mm / 5 m · per piece | 40 × 200 mm / 5 m | per piece | Order directly after current checks |
| 40 × 200 mm / 5,5 m · per piece | 40 × 200 mm / 5,5 m | per piece | Order directly after current checks |
Source and review
The published product baseline was checked on . Dimensions, material and variant come from the reviewed catalogue; current price, stock and ordering status are loaded above.
We publish no external manufacturer source for this product family. The certification status shown has been separately confirmed by DamwandDirect. Delivery evidence for the batch actually supplied must be checked separately on request. We infer no additional manufacturer, certification or performance claims.
Complete the construction
Frequently asked questions
This size is intended for thick, wide board structures. Whether the section is suitable depends on the complete structure and loads.
Available lengths range from 3,00 m to 5,50 m. Choose based on the run, post spacing, board orientation and cutting waste, and have the size checked before ordering if in doubt.