Suitable for
- Finish top edge
- Straight runs

Product photos show the linked item. Reference photos show the same product family, but size or length may differ. Application images and generated illustrations are visibly labelled.
Prolock components
The capping rail closes the top of a Sigma sheet piling panel. Required rails and connectors follow from the run layout.
Checking current price and availability…
The price on this page is for the individual component. See the separate sizes and prices for plastic panels. A complete revetment also needs an allowance for support posts, capping, fixings and transport.
Choose variant and quantity. Where an order button is shown, add the item to your cart and check delivery or collection and the total before payment. Where a quote button is shown, request a non-binding proposal. We confirm product choice, availability and delivery; an enquiry is not yet an order.
Collection is available by appointment in Meppel. Delivery takes destination, access, unloading place and any multiple loads into account.
View delivery and collectionChoose the appropriate Sigma finish
The Sigma capping rail creates a continuous finish over the top of the panels. A profile cap closes an individual open profile top.
First choose how the top edge should look. Then count open profile tops for caps, or plan a continuous finish in capping rail lengths and joints.
The price on this page covers one capping profile in the selected length. A capping profile is the top finish; the sheets below are ordered separately. At a working width of 50 cm, one straight linear metre needs two sheets.
View Sigma sheets, lengths and sheet costs per metre
Choose a 3- or 6-metre Sigma capping rail above. The sales unit is one piece in the selected length; the amount shown is for the whole length, not per linear metre.
Measure each straight section between start, corner and end separately. Allow for joints and cutting waste in the length plan. Simply dividing the total bank length by 3 or 6 does not give a complete cutting and material list.
For a continuous capping rail, the Sigma capping rail connector belongs at the joint between two lengths. A Prolock Sigma corner profile has another purpose: joining panels at a change in direction.
The capping rail and connector are ordered separately.
This guide concerns Sigma. Have connections to Nova, Omega or another existing system confirmed separately.
Prepare your project checkProfextru describes finishing options and corner connectors in the official Prolock accessories. Voor de volledige systeemopbouw verwijst de fabrikant naar Prolock Sigma.
Check the selected variant
Compare exact size, material variant, finish and sales unit before ordering or requesting a quotation. The selector above determines the selected SKU, price and current availability status.
How do the plastic panels, piles and capping work together? See how Prolock works with an explanatory schematic.
Dimensions and sales units
This size and unit baseline was checked on 25 August 2026. While loading, DamwandDirect checks the current management status. A price, stock status or ordering action appears only after that check.
| Variant | Size | Sales unit | Route |
|---|---|---|---|
| 3 m · per piece | 3 m | per piece | Order directly after current checks |
| 6 m · per piece | 6 m | per piece | Order directly after current checks |
Source and review
The published product baseline was checked on . Dimensions, material and variant come from the reviewed catalogue; current price, stock and ordering status are loaded above.
View the official product source from Profextru / Prolock (opens in a new tab)
Complete the construction
Frequently asked questions
Do not simply divide the net run length by six: allow for corners, joints and practical cutting waste.
Use a Sigma capping rail connector at each planned length joint and check alignment before final fixing.