15 metres · CompletedA low bank along a stream
0.80 metres panel height · Prolock Sigma
7 metres straight + 2 metres at a right angle · clay soil

A bank with a right-angled corner, approximately 90 cm water depth and an intended top edge 25 cm above water. Together this is 115 cm from the top to the waterbed.
The material schedule includes 18 Sigma panels of 1.50 m, internal spruce posts, a waling and six anchors. A plastic capping beam finishes the top edge.
The low black-brown top edge follows the corner of the bank. Most of the structure disappears under water and into the ground. The garden layout is depicted anonymously.
Rotate the model with your mouse or finger. Zoom into a detail or highlight a component to see how everything fits together.

Drag to rotate · Zoom into details · Look below ground
Completed project, reconstructed from the material schedule. Anchor locations, post tops and connection details were not surveyed; small fasteners are not shown.
18 panels of 50 × 150 cm retain the soil.
18 round spruce posts, Ø 100 mm and 2.50 m long, in the hollow chambers.
The horizontal 50 × 100 mm hardwood waling connects the wall.
Six 2 m M10 rods connect to six hardwood anchor posts.
9 m of plastic capping beam and a corner connection; stock lengths are cut to size.
Quantities follow the project quotation. You can see unit prices at the stated date, required quantities and line totals. Selected stock lengths are listed for timber.
Prices dated 13 November 2026
Transport and installation excluded
Fasteners are calculated individually by dividing the box price by the number of pieces. Only the required quantity is included. Unit prices are carried through without intermediate rounding; line totals are rounded to cents.
| Material | Estimated quantity | Price per piece / unit | Line total incl. VAT | Notes |
|---|---|---|---|---|
| Sigma panel · 0.5 m wide · 1.5 m long | 18 pieces | €51.75per piece | €931.50Price at stated date | Price for the stated size. |
| Unfinished milled post · Ø 100 mm · 2.5 m long | 18 pieces | €12.35per piece | €222.30Price at stated date | Price for the stated size. |
| Prolock corner profile · 3 m long | 1 piece | €55.00per piece | €55.00Price at stated date | Price for the stated size. |
| Hardwood waling · 50 × 100 mm · 2.5 m long | 1 piece | €21.90per piece | €21.90Price at stated date | Dimension match; timber species of the current variant unverified. |
| Hardwood waling · 50 × 100 mm · 3.5 m long | 2 pieces | €30.65per piece | €61.30Price at stated date | Price for the stated size. |
| Plastic capping beam · 6 m long | 1 piece | €175.00per piece | €175.00Price at stated date | Price for the stated size. |
| Plastic capping beam · 3 m long | 1 piece | €87.50per piece | €87.50Price at stated date | Price for the stated size. |
| Capping beam connector | 1 piece | €11.00per piece | €11.00Price at stated date | Price for the stated size. |
| Carriage bolt M10 x 160 mm with nut and large-diameter washer; capping beam | 20 bolt sets M10 × 160, each including a nut and one large-diameter washer | €0.978per set | €19.56Price at stated date | One bolt including a nut and one large-diameter washer per joint. Only the required quantity is included. A galvanised version was selected for this estimate.20 × M10 × 160 carriage bolt including nut at €0.893 per piece20 × M10 large-diameter washer at €0.085 per piece |
| Carriage bolt M10 x 190 mm with nut and large-diameter washer; waling | 20 bolt sets M10 × 190, each including a nut and one large-diameter washer | €1.107per set | €22.14Price at stated date | One bolt including a nut and one large-diameter washer per joint. Only the required quantity is included. A galvanised version was selected for this estimate.20 × M10 × 190 carriage bolt including nut at €1.022 per piece20 × M10 large-diameter washer at €0.085 per piece |
| Coupling nut M10 | 6 individual coupling nuts M10 × 30 mm | €0.65per piece | €3.90Price at stated date | Available individually. A galvanised M10 × 30 mm coupling nut was selected for this estimate. Transport is excluded. |
| Threaded rod M10 · 2 m long | 6 pieces | €4.90per piece | €29.40Price at stated date | M10 × 2 m dimension match and calculation choice; steel, coating, strength and structural equivalence not established. |
| Hardwood anchor post · 70 × 70 mm · 2 m long | 6 pieces | €15.85per piece | €95.10Price at stated date | Price for the stated size. |
| Total materials incl. VAT | €1,735.60 | Transport and installation separate | ||
No amount has been estimated here for these works. A total price for a new site follows from its own circumstances and quotation.
A corner requires room for anchoring in two directions. The arrangement shown is a reconstruction.
The visible height is 25 cm above water; the 150 cm panel height is the full product dimension.
18 panels of 50 cm together make 9 m.
Fasteners are calculated by the required number of pieces. Each bolted joint comprises one bolt with a nut and one large-diameter washer.
For a 9 m bank, the waling allowance is 1 × 2.5 m + 2 × 3.5 m = 9.5 m. This example leaves 0.5 m of timber unused.
Further reading: Prolock Sigma · Revetment and costs · Installation advice · Permits and consent
An approximate length, a photograph and a short description are a good start. We can then discuss materials, access and costs together.