9 metres · CompletedA garden edge with a corner
1.50 metres panel height · Prolock Sigma
30 metres · bank alongside small leisure boats

The old bank consisted of partly sunken corrugated sheets and posts. The water is approximately 40 cm deep immediately in front of the wall; it gets deeper further from the bank.
60 Sigma panels of 1.50 m with internal posts, 30 m of waling and a hardwood capping board. The base estimate uses spruce posts; hardwood was an alternative.
A long, understated top edge, approximately 25 to 30 cm above water. The rendering simplifies the alignment to a straight line; the actual inlet was not surveyed.
Rotate the model with your mouse or finger. Zoom into a detail or highlight a component to see how everything fits together.
Detail of the first 4 metres. One panel is omitted to reveal the posts. Open 3D to see the whole bank.

Drag to rotate · Zoom into details · Look below ground
Completed project; the image and estimate follow the spruce base option. The straight alignment, anchor locations and connections are reconstruction choices, not a surveyed final condition.
60 panels of 50 × 150 cm form a 30 m wall.
60 round spruce posts, Ø 100 mm and 2.50 m long, in the base option.
30 m of 50 × 100 mm hardwood on the water side.
Twenty 2 m M10 rods connect to twenty hardwood anchor posts.
30 m of 30 × 200 mm capping board; ten 3 m lengths in the estimate.
Quantities follow the project quotation. You can see unit prices at the stated date, required quantities and line totals. Selected stock lengths are listed for timber.
Prices dated 13 November 2026
Transport and installation excluded
Fasteners are calculated individually by dividing the box price by the number of pieces. Only the required quantity is included. Unit prices are carried through without intermediate rounding; line totals are rounded to cents.
| Material | Estimated quantity | Price per piece / unit | Line total incl. VAT | Notes |
|---|---|---|---|---|
| Unfinished milled post; base option · Ø 100 mm · 2.5 m long | 60 pieces | €12.35per piece | €741.00Price at stated date | Price for the stated size. |
| Sigma panel · 0.5 m wide · 1.5 m long | 60 pieces | €51.75per piece | €3,105.00Price at stated date | Price for the stated size. |
| Corner profile · 3 m long | 1 piece | €55.00per piece | €55.00Price at stated date | Price for the stated size. |
| Hardwood waling · 50 × 100 mm | 10 pieces of 3 m | €26.30per piece | €263.00Price at stated date | Explicit purchase choice: 10 pieces × 3 m = 30 m; not a per-metre price. Joint/cutting plan and structural suitability not established. |
| Hardwood capping board · 30 × 200 mm | 10 pieces of 3 m | €35.95per piece | €359.50Price at stated date | Explicit purchase choice: 10 pieces × 3 m = 30 m; not a per-metre price. Joint/cutting plan and structural suitability not established. |
| Carriage bolt M10 x 190 mm with nut and large-diameter washer; walings | 60 bolt sets M10 × 190, each including a nut and one large-diameter washer | €1.107per set | €66.42Price at stated date | One bolt including a nut and one large-diameter washer per joint. Only the required quantity is included. A galvanised version was selected for this estimate.60 × M10 × 190 carriage bolt including nut at €1.022 per piece60 × M10 large-diameter washer at €0.085 per piece |
| Coupling nut M10 | 20 individual coupling nuts M10 × 30 mm | €0.65per piece | €13.00Price at stated date | Available individually. A galvanised M10 × 30 mm coupling nut was selected for this estimate. Transport is excluded. |
| Threaded rod M10 · 2 m long | 20 pieces | €4.90per piece | €98.00Price at stated date | M10 × 2 m dimension match and calculation choice; steel, coating, strength and structural equivalence not established. |
| Hardwood anchor post · 70 × 70 mm · 2 m long | 20 pieces | €15.85per piece | €317.00Price at stated date | Price for the stated size. |
| Stainless-steel hardwood screw 5.0 x 60 mm; capping board; quantity per box not stated | 200 individual stainless-steel hardwood screws 5.0 x 60 mm | €0.13975per piece | €27.95Price at stated date | The estimate assumes 200 screws; this quantity must be determined for a new situation. Calculated individually from €27.95 / 200. Match the stainless-steel grade and application to the work.200 × Stainless-steel hardwood screw 5.0 x 60 mm at €0.13975 per piece |
| Total materials incl. VAT | €5,045.87 | Transport and installation separate | ||
Replacing the 60 spruce posts with hardwood posts brings the material estimate to €5,441.87 including VAT. That is €396.00 extra.
No amount has been estimated here for these works. A total price for a new site follows from its own circumstances and quotation.
Wave action, water level and the unknown ground profile help determine which construction suits a new site.
The material schedule includes one corner profile. Its exact position and angle have not been recorded, so no corner has been invented in the image.
The alternative estimate with 60 hardwood posts is €5,441.87 including VAT. The quotation does not establish which post option was ultimately installed. Both price options are therefore stated separately.
60 panels of 50 cm together make 30 m.
For this estimate, both the waling and capping board are selected as 10 lengths of 3 m. Joint and cutting plans belong to the detailed design of a new project.
Fasteners are calculated by the required number of pieces. Each bolted joint comprises one bolt with a nut and one large-diameter washer.
Further reading: Prolock Sigma · Revetment and costs · Installation advice · Permits and consent
An approximate length, a photograph and a short description are a good start. We can then discuss materials, access and costs together.